Rancilio CLASSE 10 Bedienungsanleitung PDF herunterladen (Seite 16)

5. TRANSPORT

5.1. Packaging

The machine is delivered in a strong cardboard box

with internal protection.

The packaging bears symbols which must be obser-

ved during handling and stocking of the item.

Always keep the package in a vertical position

during transport. Do not turn it over or lay it

on its side and avoid bumping and exposure

to atmospheric agents.

The operator must always follow the indications

contained in this manual. In the case of a failure or if

the machine is not working properly, switch it off and

do not attempt any direct repair. Refer exclusively

to a service centre.

The user must not:

● touch the hot surfaces and dispensing areas;

● place liquids containers on the machine;

● put his hands under the spouts during use;

● transport the machine or carry out maintenance

operations when the plug is connected or when

the machine is hot;

● wash the machine with water or steam jet;

● dip completely or partially the machine in water;

● use the machine if the cable is damaged;

● touch the machine when his hands or feet are wet

or damp;

● use the machine when there are children in its

proximity;

● allow the machine to be used by children or unt

people;

● obstruct the suction or dispersal grilles with cloth

or any other thing;

● do not use the machine when wet or very damp.

4.1. Precautionary measures

This machine may only be used with foodstuffs. It

cannot be used for heating liquids or grinding any other

kind of product that could damage and pollute it.

The manufacturer cannot be held responsible

for damage to people or things caused by

unsuitable, erroneous or irrational use.

5.2. Inspection on receipt

Check that the machine received corresponds to

the one indicated on the delivery note, including any

accessories.

Check that it has not been damaged during transport

and, if so, inform the forwarder and our customer

service ofce immediately.

The packing elements (plastic bags, expan-

ded polystyrene, nails, cardboard, etc.) must

not be left within reach of children as they are

potential sources of danger. Do not dispose

of the packing elements in the environment;

consign them to rms authorized for their

disposal.

6. INSTALLATION

The appliance is only to be installed in loca-

tions where use and maintenance is restricted to

trained personnel.

The machines are tted with height adjustable feet.

The support surface shall be levelled, dry, smooth,

steady and stable and at such a height that the cup-

warming surface is at over 150 cm from ground. Do

not use water jets or install where water jets are

used.

In order to guarantee normal operation, the machine

must be installed in areas that the environmental

temperature is between +5°C ÷ +32°C end humidity

of not over 70%.

It does not need to be anchored to the surface and it

does not require any technical operations to dampen

vibrations in order to operate properly.

It is recommended to leave the area around the ma-

chine free to facilitate its use and the performance

of any maintenance operations.

If the machine is wet or very damp, wait until it is

completely dry before installing or using it. It is always

necessary to request an accurate control to qualied

service people in order to nd any possible damage

to the electric components.

Reserve an area near the machine for the installa-

tion of the coffee grinding and dosage machine (see

relevant documentation).

The machine is usually equipped with a water sof-

tener, type DP2 or DP4, which must be connected

by the user in compliance with the laws in force.

Should a different softener be installed, refer to the

documentation of the relevant product.

A dreg drawer should be tted by the installer.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 37 38

Kommentare zu diesen Handbüchern

Keine Kommentare

Rancilio CLASSE 10 Bedienungsanleitung Seite 16

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kaffeemacher Rancilio CLASSE 10